How to Remove Mold from a Top Loading Washer

One of the main problems with the washing machine is the appearance of mold. It is very annoying because the clothes do not fit well or have a good scent no matter how much you use detergents and fabric softeners with floral or pine scents, among others. In addition, it is a smell that can spread throughout the house through clothing, such as towels placed in the bathroom, or from the washing machine itself when there is a large amount of mold.

This problem, fortunately, has a solution, although the best weapon is always prevention so that it does not occur and accumulate in pipes or in areas that are difficult to access. Obviously, each appliance has its own peculiarity. In FoxWiki today we are going to focus on how to remove mold from top loading washing machine.

How to remove mold from a top-loading washing machine step by step

Removing mold from a top-loading washing machine is a somewhat lengthy process, but it is easy to do. Furthermore, the advantage is that you achieve a good result, as well as eliminating the inconvenience it generates. But let’s go by steps:

The surface rust cleaning It’s the first thing you have to do. To do this, it is best to take a white cloth and put bleach on it and then rub the entire inside of the washing machine. As it is top-loading, it may be difficult for you to reach the bottom, so you can help yourself with a stick, such as a broom or duster, to which you can tie the cloth so that it does not stay inside.
Fill the drum with hot water It is the next step you must take. Then, add a little bleach. If you don’t want to use this product because you are afraid that your clothes might come out stained later, you can use an alternative: white vinegar.
Then, do a wash simply with hot water and bleach or white vinegar.
When the wash is finished, take the receptacle that it has for softening fabrics and put it in the sink or in a basin with very hot water and a few drops of liquid dish soap. You can also add white vinegar. It is important that the receptacle is well covered. Now you have to wait approximately half an hour.
Next, wash the receptacle with that mixture.
Finally, rinse it with cold water and, above all, dry it very well with a towel or cloth that is very soaked, because, if there is water left, it will help the mold to reappear. When it is very dry, put it back in its place.

With these steps, the top-loading washing machine should now be free of mold and ready to wash the clothes again perfectly and without bad odors remaining in it or in the environment of the house. If you need more information, you will find it in this other article about How to remove mold from the washing machine.

How to Prevent Mold from a Top Loading Washer

Although removing mold, as we have seen, is not complicated, it is always better to prevent its appearance. And if it has never happened to you, you will think that the washing machine has broken down and that the bad smell is the fault of the soaps or fabric softeners you use. It is not like this. At least, not always.

Prevention is also easy because they are small gestures that are easy to do on a daily basis. The most important thing is that you always leave the lid open after all washes so that the interior dries well and airs out. If there is no humidity, you reduce the chances of mold appearing.
Also, from time to time, you can do a wash without clothes in which you simply add white vinegar. This will also help you reduce other bad odors that occur, in addition to avoiding mold in areas that are more difficult to access such as pipes.
And of course, never leave clothes inside the washing machine once the wash cycle has finished. It is best to remove them as soon as possible so that the drum can air out and dry. Otherwise, it will encourage the appearance of mold both in the washing machine and in the clothes you have washed.

You may also be interested in this other article on How mold affects health.

Other tips related to washing machine mold

Apart from prevention and proper care and maintenance of the washing machine, it is also important that you pay attention to drains and pipes. Many times the problem is in that area because the water cannot pass through well or because there are traces of detergents or softeners, which clog the pipe and cause stagnant water to remain.

In this way, always make sure that the pipes are not clogged and that the water drains completely after each wash. These are tips on how to remove mold from the top-loading washing machine that we give you at FoxWiki. And, if you have any questions or problems, always consult with a technician or professional specialized in this type of appliance. If your washing machine has stained your clothes with mold, you may find this other article useful. How to remove mold stains from clothes.