Tricks for cleaning after work

A renovation at home or the remodeling of some of its rooms is a change that can be exciting but, at the same time, somewhat stressful: on the one hand, it is exciting, since we have the hope that when we see the final result it will be as it is. as we had expected. On the other hand, renovations are stressful, since we will have to endure construction and noise during the period it lasts. And after construction, one of the most annoying parts of this change remains: clean and collect all debris.

However, amidst all the debris and dirt, it is normal for you to ask yourself: where do I start collecting? Before you get stressed and start doing it without any order, we recommend that you read the following FoxWiki article where we will give you tricks for cleaning after work.

How to remove dust after work

The first thing we will have to do when the renovation is finished is take care of all the dust that has accumulated during the masonry. However, although your first impulse is probably to grab a broom and start sweeping, this is precisely what you should avoid since all we will achieve is spreading dust and debris from one place to another, instead of completely eliminating it.

To effectively remove dirt and dust from the floor, it is recommended that you follow these 2 simple steps:

Open the window of a room and place a fan pointed outwards so that it expels particles and dust accumulated in the air out of your home. Repeat the process in all renovated rooms.
Uses a Vacuum cleaner robot like those offered I LIFE, to clean the floor: the robot vacuum cleaner is especially useful, since it has a high-efficiency filter that absorbs all the dirt that exists on the floor. For example, the ILIFE W400 robot vacuum cleaner cleans the toughest stains without damaging the floor while cleaning. The result is an impeccable floor. When you have made about 10 passes through the home, it is important that clean your filter to start cleaning again until the floor is completely free of dirt.

Tricks for cleaning after a job - How to remove dust after a job

Deep cleaning after work: ceilings and walls

Another important step that you should do after finishing a job is to remove the dirt accumulated on the walls and ceilings due to the continuous use of the different tools used in remodeling. To do this, we recommend that you follow these simple steps:

Fill a bucket with water and submerge a mop in the container until wet.
Before using it, it is important that the mop does not have excess water. To do this, squeeze it until you see that it does not spill. not a drop of water.
Once the mop is prepared, you will have to place it in the corner between the wall and the ceiling, and you will have to mop it as if it were a floor.
When you are done with that area, you will have to rinse the mop and wet it again to continue cleaning other areas until both the ceilings and walls are clean.

Cleaning objects after a renovation

Once we have removed the debris and dirt from both the walls and the floor, the next step we would have to perform is clean the objects in our homesince, although at the time of the work you would cover them with plastic so as not to damage them, dust will surely have accumulated on them.

The trick to cleaning after a job is to fill a container with water and detergent and dip a cloth in it. It is important that we use additives such as detergent, since if we use only water to clean, the only thing we will achieve is dragging the dirt from one place to another.

When you have the cloth with water and detergent, wring it out to remove excess moisture and start cleaning all your objects, as well as electrical appliances, windows, tables and other furniture. It is important that every time you see the dirty cloth, you dip it in the mixture again to continue cleaning your objects.

Other tricks to clean after work

In addition to the previous recommendations, it is also advisable that you take into account the following tricks that will help you complete the cleaning of your home after completing the renovations:

stains on the floor: If there are stains on the floor, try soaking a cloth in either soda or hydrogen peroxide and wipe it over the areas of the surface that have become dirty.
Paint or varnish stains: For traces of paint or varnish, a very effective remedy is nail polish with acetone. Wet the paint stain with this product and then scrape it with a putty knife until it is removed.
Cement or mud stains: If you have stains caused by remains of cement or mud, it is advisable to wet a cloth with some descaling product and wipe it over where the dirt is. Finish removing the stains with the help of a spatula.

Finally, we recommend that, once you finish cleaning everything after a job or renovation, use the robot vacuum cleaner again to clean any type of dirt that may have been left on the floor or floor. In this way, with robot vacuum cleaners you will ensure that your home is impeccable.

Now that you know these tricks for cleaning after a job, you may also be interested in this other FoxWiki article about How to clean a porcelain floor.