How to Polish Marble – Step by Step and Tips!

Before starting polish marbleWhether you want to use a specialized product or home remedies, it is important to prepare it. To do this, you will have to determine what type of marble you have, since each one may need specific care.

The second step will be to learn How to clean marble, since this way you will eliminate grease and dirt and you will be able to obtain a more effective result. After cleaning and before polishing, you will need to dry the entire surface well so that it is not wet.

The most recommended option to polish marble is to purchase a quality commercial polisher. To do this, you will have to follow the instructions on each container, however, below we offer you a generic step by step that usually works well for all marbles.

Keep in mind that if you are trying to polish a marble top it will be easier to do it by hand. However, if you want to polish large surfaces such as a floor, you will have to use a polisher.

1. Start by pouring a small amount of polish onto the surface.
2. This gritty liquid will cause the first layer of the marble to split open and be removed easily. This is how you will be able to get rid of stains and superficial scratches.
3. Take some cotton and moisten it in water. Then, make circular movements so that the product enters more easily.
4. When the surface is completely polished, wipe it with a clean, dry cloth to remove any debris.

In the event that the marble is too scratched It is best to hire a professional service to polish the surface and make it shiny again.

It is important that when polishing marble you use a clean, soft cloth that allows you to perform this task without scratching the surface. With this in mind, let’s look at some home remedies to polish marble.

How to polish marble with baking soda

To polish marble with baking soda, follow these steps:

1. Mix 3 tablespoons of baking soda and 1/4 of mineral water.
2. If you are polishing a large marble surface, you will have to add more of each ingredient, until it forms a paste.
3. Apply this mixture using a clean, soft cloth. A thin layer of this product is enough to achieve good results.
4. Let dry for at least 3 hours and then remove the product with a clean soft cloth and warm water.
5. Then, go over with another microfiber cloth and use wide circular motions to dry and polish the surface, reducing the size of the circle as it dries.
6. You will see how after all this process, your marble looks shiny and beautiful.

How to polish marble with marseille soap

If you prefer to use Marseille soap, follow these instructions:

1. Prepare a saucepan with water and add two tablespoons of Marseille soap.
2. Put the saucepan over low heat so that the soap melts and stir with a wooden spoon until there is a homogeneous liquid.
3. Remove the container from the heat and allow to cool before using.
4. When the liquid is warm, soak a soft cloth and wipe it over the entire surface of the marble.
5. Remove the liquid with a clean cloth soaked in cold water before the soap sticks to the marble.

Once you have polished your surface, we will explain how to polish marble so that it remains shiny and like new. To carry out this task, we will use two homemade products that are as common and beneficial for cleaning the home as lemon and alcohol. Follow this step by step:

1. Take a saucepan or other large enough container.
2. Pour warm water into said container and then add the juice of half or one lemon, depending on the size of the surface you want to polish.
3. Next, also add a little 70% alcohol.
4. Mix well and spread it over the entire surface with the help of a soaked dry cloth.
5. Rub the most affected parts.
6. Let the mixture sit for a few minutes and, finally, remove the excess liquid with a dry cloth.

If you want more details to discover How to polish marble be sure to visit this other FoxWiki article.

If you want to read more articles similar to How to polish marble we recommend that you enter our Home Cleaning category.